Mobile Sterilization Systems
How It Works?
You can examine the working stages of the sterilization device below.
At the beginning of the cycle , once the upper lid opens, the operator loads the waste in the loading chamber.
The shredder, controlled by the PLC, changes rotation direction due to the “anti blocking” capability that prevents the blades to get jammed. Durring the shredding process the waste is treated with microwave generated by 6 integrated magnetron units (Optional)
Our special design shredder is capable of grinding very hard materials like surgical stainless steel instruments and hard ceramics.
Heating is achieved by injecting saturated steam until the homogeneous temperature in the upper and lower chamber reaches 134°C (274 F). Sterilization is completed by maintaining 134°C (274 F) – 138 °C (280 F) temperature and equivalent pressure for a period of 10 – 15 minutes.
These factors provide the possibility to decrease the pathogenic contamination level in the medical waste by 8 Log 10 value.
Excess steam in the chamber is removed during cooling phase and the temperature of the grinded sterilized waste is lowered to by injecting cold air in the chamber of the autoclave.
The condensed water, that sterile and can be safely discharged into the sewage system is drained with the help of positive pressure or vacuum.
According to the COMMUNIQUE FOR WASTE TRANSPORTATION IN ROADS Except for the medical waste transport vehicle, there is a “Waste Transport Vehicle” with a vertical height of at least 20 cm on the sides and back of the transport vehicle chassis or tanker.
The outer surfaces of the medical waste transport vehicles are orange color, with the appropriate size to be seen on the right, left and rear surfaces and in black colored “International Biohazard” emblem and in black letters “ATTENTION! MEDICAL WASTE” must be found.
Our medical waste transportation vehicles are manufactured in accordance with the Communiqué on the Transport of Waste on the Highways.
Features of our Medical Waste Transport Vehicles
- The waste bin of medical waste trucks is designed to be robust, durable and leakproof.
- There is a lock on the covers of medical waste casings.
- The rear and side shields of the medical waste truck are available.
- The transport part is made of stainless steel material with smooth surface which can be easily cleaned and disinfected.
- In the design, which prevents the accumulation of fluid in the conveying section, the intersecting surfaces are joined together with soft turns so that they do not have vertical corners.
- In accordance with the regulation, there is absolutely no compression mechanism in the transport section of medical waste trucks.
There is a safe distance between the waste transport section (medical waste container) and the driver’s site.(It is available in the manufacture of vehicles to prevent possible collision at the time of accident.)
There is an appropriate size and black color “International Biohazard” emblem visible on the right, left and back surfaces and “CAUTION MEDICAL WASTE” written in black letters.
The whole vehicle (including the case and cup) is “ORANGE” color.
Medical waste transport vans used by hospitals and health centers have specially produced cranes and hydraulic systems.
You can contact us to find out our prices for Medical Waste Transport Vehicles.
VIDEOS
You can watch the videos by clicking on them.
1 5
Offices Worldwide
50+
Distributors Worldwide
150+
Employees
200+
System Installed